Bavaria 301/302 curcuit board

Model-specific questions/discussions.
Post Reply
George
Posts: 2
Joined: Fri Oct 18, 2019 2:28 pm

Bavaria 301/302 curcuit board

Post by George » Sat Oct 19, 2019 5:32 am

Dear all,
I am new member of the forum, so please excuse me if this is topic which you have discussed previously. If anyone has an insight, it will be much appreciated.
Here is the problem:

My navigation lights suddenly stopped working - bow, stern, masthead and steaming lights. The deck flood light works, even though it is located in a joint light with the steaming light, but is controlled via a separate circuit.

The light bulbs are OK - checked. Cables are OK. Fuses are OK.

The yacht is a 2007 Bavaria 39 Cruiser, equipped with the standard 301/302 electrical panel, which indicates faulty circuits. When I remove the respective fuse for each light, I get a fault signal (blinking indicator). When the fuse is returned, there is no fault signal, but the lights do not come on.
Any ideas?
Thank you in advance.
Best regards,
George Matveev

Post Reply