Cruiser 38 (2006) 'notchy' steering

General maintenance discussion.
Post Reply
Boxer
Posts: 1
Joined: Tue Sep 05, 2017 8:18 am

Cruiser 38 (2006) 'notchy' steering

Post by Boxer » Tue Sep 05, 2017 8:34 am

Greetings
I'm a new member of the forum with my first post.
I have a 38 Cruiser, 2006 vintage and am experiencing notchy steering which I suspect is to do with the friction lock.
Can anyone advise how to free this up please?
Thanks in anticipation.
Regards
Nick
Top
odysseus
Posts: 3
Joined: Thu Aug 31, 2017 4:51 am

Re: Cruiser 38 (2006) 'notchy' steering

Post by odysseus » Sat Oct 14, 2017 4:43 am

Put oil in the rubber tube , best done before you lift out oil runs around bearing frees it up.
20140701_125749.jpg
You do not have the required permissions to view the files attached to this post.
Top
Oz-Bavarian
Posts: 1
Joined: Sat Feb 03, 2018 10:12 pm

Re: Cruiser 38 (2006) 'notchy' steering

Post by Oz-Bavarian » Sat Feb 03, 2018 10:26 pm

I have a Bavaria 36 with the same notchy feel to the steering. This notchiness has only occurred in the last couple of months. Does it mean that the bearing(s) on the rudder have already failed?
I will try putting oil down the rudder tube and see if this works.
Has any one else had this problem and how was it resolved?
Top
Post Reply

Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 1 guest